HOME >> Rotary joint >>  multiport rotary joints

2-4-6-8 Passage with a Straight Centre Bore rotary joint

The MEER unions , thanks to the special design of the seals and the surface of the rotor ground, hardened and lapped may operate at high fluid pressure and low rotation speed with low friction and wear.
Operating data
  • MEDIA


    Water,Air&Vacuum ,Hydraulic Oil


  • PRESSURE MAXIMUM


    250bar

  • TEMPERATURE MAXIMUM


    90°

  • SPEED MAXIMUM


    200rpm

  • SIZE


    DN10(3/8″)-DN25(1″)


  • PASSAGE NUMBER


    2-4-6-8

Productcharacteristics


MEER 2-4-6-8 PASSAGE WITH A STRAIGHT CENTRE BORE


The MEER  unions , thanks to the special design of the seals and the surface of the rotor ground, hardened and

lapped may operate at high fluid pressure and low rotation speed with low friction and wear.


Also they may remain inactive for long periods without seizing. An antirotation pin is provided to prevent the rotation; stop it with a slack slot. To avoid contamination in case of leaks, it is necessary that one only type of fluid flows in both passages.


Avoid to operate the union under pressure surges, and, at the max suggested operating limits, without consulting the MEER

customer service.


Special version for clean water available.



Contact MEER before running the rotary joints to the limit of their given operating specifications simultaneously.